Mapei Ultracolor Plus High Performance Tile Grout Fast Set Water Repellent | 5Kg (TERRACOTTA143)
Please sign in so that we can notify you about a reply
DropEffect technology is an ultra premium, fast-setting, polymer-modified, color-consistent, non-shrinking, efflorescence-free grout for joint widths from 2mm to 2cm
Drop Effect technology reduces surface absorption to help repel water, dirt, and grime from penetrating grout joints
Ultracolor Plus is specially formulated with Mapei is high-hydrated cement technology to eliminate the common problems related to Portland-cement grout, such as colour consistency and efflorescence
It is suitable for interior and exterior residential and commercial floor and wall surfaces in dry or wet conditions
It can be exposed to foot traffic within 3 to 4 hours Grouting may take place when the adhesive is completely set. The joints must be clean, free of dust and empty down to at least 2/3 of the thickness of the tiles. Any adhesive or mortar which has seeped into the joints while laying the tiles must be removed while still fresh. With very absorbent tiles, high temperatures or windy conditions dampen the joints with clean water. Preparing the mix: While stirring, pour Ultracolor Plus into a clean, rust-free container containing 21-23and#37; by weight of clean water. Mix the grout with a low-speed mixer to avoid air entrainment, until a smooth paste is obtained. Let the mix stand for 2-3 minutes, and stir again briefly before use. Use the mix within 20-30 minutes of its preparation. Applying the grout: Fill the joints with the Ultracolor Plus mix using a special MAPEI grout float or rubber squeegee, without leaving any gaps or steps. Remove any excess of Ultracolor Plus from the surface, by moving the float diagonally to the joints while the mix is still fresh.
No reviews found
